2007 Beck LM 800 Supercar twin turbocharged V8


2007 Beck LM 800 Supercar twin turbocharged V8

The Beck LM 800 is built on the principle of lightweight and aerodynamic efficiency. It uses composite materials to to keep the weight down and a form over function styling brief to keep the frontal area and drag coefficient to a minimum.
The LM 800 is a supercar from Beck Engineering & Composites GmbH based in Switzerland. The Beck LM 800 went on show in January 2007 in Vienna.
The construction of the Beck LM 800 is similar to that found in Formula 1 race cars with a carbon, Kevlar and aluminium composite monocoque protecting the driver and passenger, as well as providing a rigid base to attach the engine and transmission mounts and front control arms of the chassis. The LM 800 has an electronically controlled, hydraulic active chassis also influenced by F1 technology, which reacts to telemetry data and helps to keep the car firmly stuck to the road.
The engine is a V8 especially produced by MTM for the Beck LM 800 with a displacement of 4.2 litres and, thanks to two turbochargers, delivers a performance of around 650 HP (variable from 550 - 1000 hp) to the drive shaft. The drive unit is designed in such a way that even acceleration is achieved across the entire range up to a top speed of over 217 mph. The semi-sequential 7-speed gearbox is perfectly coordinated with the Beck LM 800 and reacts instantly to driver input.
The wheels of the Beck LM 800 are specially made and formed from aluminium. An in-built hydraulic jacking system makes tire changes a breeze.

2007 Beck LM 800 Supercar twin turbocharged V8


2007 Beck LM 800 Supercar twin turbocharged V8

The Beck LM 800 is built on the principle of lightweight and aerodynamic efficiency. It uses composite materials to to keep the weight down and a form over function styling brief to keep the frontal area and drag coefficient to a minimum.
The LM 800 is a supercar from Beck Engineering & Composites GmbH based in Switzerland. The Beck LM 800 went on show in January 2007 in Vienna.
The construction of the Beck LM 800 is similar to that found in Formula 1 race cars with a carbon, Kevlar and aluminium composite monocoque protecting the driver and passenger, as well as providing a rigid base to attach the engine and transmission mounts and front control arms of the chassis. The LM 800 has an electronically controlled, hydraulic active chassis also influenced by F1 technology, which reacts to telemetry data and helps to keep the car firmly stuck to the road.
The engine is a V8 especially produced by MTM for the Beck LM 800 with a displacement of 4.2 litres and, thanks to two turbochargers, delivers a performance of around 650 HP (variable from 550 - 1000 hp) to the drive shaft. The drive unit is designed in such a way that even acceleration is achieved across the entire range up to a top speed of over 217 mph. The semi-sequential 7-speed gearbox is perfectly coordinated with the Beck LM 800 and reacts instantly to driver input.
The wheels of the Beck LM 800 are specially made and formed from aluminium. An in-built hydraulic jacking system makes tire changes a breeze.

B. Engineering Edonis Super Car by Jean Marc Borel


B. Engineering Edonis Super Car by Jean Marc Borel

The Edonis cannot be described as a beautiful car, but it certainly eye catching. Its angular, complicated lines crash awkwardly together in a chaotic fashion, this trend is evident from almost every angle. The headlights give the impression of tiredness, or even depression.
The Edonis supercar is a creation of B. Engineering, a company run by Jean Marc Borel. The Edonis was intended as a demonstration of the design and prototype abilities of his company. The B. Engineering Edonis is a genuine supercar with a 0-60 time under 4 seconds, and a maximum speed of 225 mph.
B. Engineering Edonis Super Car by Jean Marc Borel

The Edonis
has little to be sad about. Twin turbochargers feed a 3.7 litre V-12 engine to create a whopping 680 bhp at 8,000 rpm. All this power is run through a six-speed manual gearbox.
Using a monocoque built from carbon fiber the Edonis is very strong and light. All the cosmetic exterior body panels are aluminum. To reduce weight further aluminum brake calipers are used.
To save even more space and weight the Edonis rides on Michelin PAX run-flat tires, this means a spare wheel is surplus to requirement.

B. Engineering Edonis Super Car by Jean Marc Borel


B. Engineering Edonis Super Car by Jean Marc Borel

The Edonis cannot be described as a beautiful car, but it certainly eye catching. Its angular, complicated lines crash awkwardly together in a chaotic fashion, this trend is evident from almost every angle. The headlights give the impression of tiredness, or even depression.
The Edonis supercar is a creation of B. Engineering, a company run by Jean Marc Borel. The Edonis was intended as a demonstration of the design and prototype abilities of his company. The B. Engineering Edonis is a genuine supercar with a 0-60 time under 4 seconds, and a maximum speed of 225 mph.
B. Engineering Edonis Super Car by Jean Marc Borel

The Edonis
has little to be sad about. Twin turbochargers feed a 3.7 litre V-12 engine to create a whopping 680 bhp at 8,000 rpm. All this power is run through a six-speed manual gearbox.
Using a monocoque built from carbon fiber the Edonis is very strong and light. All the cosmetic exterior body panels are aluminum. To reduce weight further aluminum brake calipers are used.
To save even more space and weight the Edonis rides on Michelin PAX run-flat tires, this means a spare wheel is surplus to requirement.

Spiess TC 522 prototype supercar twin-turbo V8


Spiess TC 522 prototype supercar twin-turbo V8

The Spiess TC 522 was a supercar prototype from 1992. It was created by a Spiess, a German company better known for creating industrial electrical transformers.

The TC 522 was powered by a mid-mounted 5.7 litre, twin-turbo V8. The transmission was handled by a 6 speed manual driving the rear wheels. The Spiess TC 522 had a carbon-fibre composite body. Due to its high price, and a worldwide economic slow down, the TC 522 never left the prototype stage.

Spiess TC 522 prototype supercar twin-turbo V8


Spiess TC 522 prototype supercar twin-turbo V8

The Spiess TC 522 was a supercar prototype from 1992. It was created by a Spiess, a German company better known for creating industrial electrical transformers.

The TC 522 was powered by a mid-mounted 5.7 litre, twin-turbo V8. The transmission was handled by a 6 speed manual driving the rear wheels. The Spiess TC 522 had a carbon-fibre composite body. Due to its high price, and a worldwide economic slow down, the TC 522 never left the prototype stage.

LINK EXCHANGE



Hi ...,
I Joorica, as a friend, you may call me Joo ..

If you are interested to exchange links with my blog, you can add the code below in your blog,


.. and the view will look as shown below

Sport Cars and the Concept

But if you are only interested to exchange text links only, simply add the code below,

and it wil look like Sport Cars and the Concept

Once you add the code above, immediately deliver a notification message through under the chatbox, I will immediately add your blog in the form of image size 80px x 15 px.

Here are blog friends who have exchanged links with me:

AUTOCLIP AUTOCLIP

BLOGGER STORE BLOGGER STORE


Sincerely Yours,

Joorica

LINK EXCHANGE



Hi ...,
I Joorica, as a friend, you may call me Joo ..

If you are interested to exchange links with my blog, you can add the code below in your blog,


.. and the view will look as shown below

Sport Cars and the Concept

But if you are only interested to exchange text links only, simply add the code below,

and it wil look like Sport Cars and the Concept

Once you add the code above, immediately deliver a notification message through under the chatbox, I will immediately add your blog in the form of image size 80px x 15 px.

Here are blog friends who have exchanged links with me:

AUTOCLIP AUTOCLIP

BLOGGER STORE BLOGGER STORE


Sincerely Yours,

Joorica